|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
SPEMA2004A Elektronische Bauelemente 1.7W Mono Fully Differential Audio Power Amplifier RoHS Compliant Product A suffix of "-C" specifies halogen or lead -free DESCRIPTION The SPEMA2004A is a 1.7W mono fully differential amplifier designed to drive a speaker with at least 8 impedance while consuming only 20 mm2 total PCB area in most applications. The device operates from 2.5 V to 5.5 V, drawing only 4mA of quiescent supply current. The SPEMA2004A is available in the space-saving 3 mm x 3 mm FBP package. The SPEMA2004A is ideal for PDA/smart phone applications due to features such as -70dB supply voltage rejection from 20 Hz to 2 kHz, improved RF rectification immunity, small PCB area, and a fast startup with minimal pop. FEATURES Designed for Wireless or Cellular Handsets and PDAs 1.7 W Into 8 From a 5-V Supply at THD = 10% (Typ) Low Supply Current: 5mA (Typ) at 5 V Shutdown Current: 0.1 A (Typ) Fast Startup With Minimal Pop Only Three External Components Improved PSRR (-70 dB) and Wide Supply Voltage (2.5 V to 5.5 V) for Direct Battery Operation Fully Differential Design Reduces RF Rectification -63 dB CMRR Eliminates Two Input Coupling Capacitors Pin to Pin Compatible with TPA2005D1 and TPA6211A1 in FBP Package Available in 3 mm X 3 mm TDFN Package PACKAGE DIMENSIONS TDFN-8 TOP VIEW REFERENCE A A3 b D D2 E E2 e L BOTTOM VIEW DIMENSIONS MILLIMETER MIN. TYP.. MAX. 0.70 0.25 2.85 2.20 2.85 1.50 0.30 0.75 0.203 REF. 0.30 3.00 2.30 3.00 1.60 0.650 REF. 0.35 0.80 0.35 3.15 2.40 3.15 1.70 0.40 DIMENSIONS INCH MIN. TYP.. MAX. 0.027 0.009 0.111 0.085 0.111 0.058 0.011 0.029 0.008 REF. 0.011 0.117 0.089 0.117 0.062 0.024 REF. 0.013 0.031 0.013 0.122 0.093 0.122 0.066 0.015 SIDE VIEW http://www.SeCoSGmbH.com/ Any changes of specification will not be informed individually. 01-June-2002 Rev. A Page 1 of 5 SPEMA2004A Elektronische Bauelemente 1.7W Mono Fully Differential Audio Power Amplifier APPLICATIONS Ideal for Wireless Handsets PDAs Notebook Computers General Purpose Amplifier BLOCK DIAGRAMS RI=40k, CI=0.39F, CS=1F C(BYPASS)=0.22F FIGURE 1. Typical Audio Amplifier Application Circuit with differential input VDD 6 To Battery CS CI IN 4 RI 40k INN 3 CI RI INP OUTP 5 + OUTN 8 RI=40k, CI=0.22F, CS=1F 40k GND 7 2 SDNB C(BYPASS)(1) 1 Bias Circuitry 120k C(BYPASS)=0.22F (1)C(BYPASS)is optional (2)Due to the fully differential design of this amplifier, the performance is severly degraded if you connect the unused input to BYPASS when using single-ended inputs. FIGURE 2. Typical Audio Amplifier Application Circuit with single-ended input http://www.SeCoSGmbH.com/ Any changes of specification will not be informed individually. 01-June-2002 Rev. A Page 2 of 5 SPEMA2004A Elektronische Bauelemente 1.7W Mono Fully Differential Audio Power Amplifier TDFN SDNB BYPASS INP INN OUTN GND VDD OUTP 1 8 2 7 3 6 4 5 MAXIMUM RATINGS Parameter Supply Voltage Operating Supply Voltage Input Voltage Power Dissipation ESD Susceptibility Thermal Resistance Temperature RJA Storage (TSTG) Operating (TOPR) Junction (TJ) VI PD Value 6.0 2.2 VDD 5.5 -0.3 to VDD +0.3 Internally limited HBM MM 63 -65 ~ +150 -40C TA 85C 150 1.5 200 Units V V V KV V C/W C ELECTRICAL CHARACTERISTICS VDD = 5V The following specifications apply for VDD = 5V, AV = 1 and RL = 8 unless otherwise specified. Limits apply for TA = 25C Characteristics Quiescent Power Supply Current Shutdown Current Output offset voltage Symbol IDD ISD VOS Typ. 5 0.1 1 Limit 8 1 5 Units mA A mV Test Conditions VIN = 0V, Io = 0A VSDNB=GND VI=0V differential, AV=1 V/V, VDD = 5.5 V THD+N = 10 %(max), f = 1kHz RL = 4 2.7 Output Power PO 1.7 2.1 1.4 Total Harmonic Distortion + Noise 0.007 0.01 0.017 W RL = 8 THD+N = 1%(max), f = 1kHz RL = 4 RL = 8 VDD = 3.6V, RL=8, f = 1kHz PO = 0.6 Wrms PO= 0.25 Wrms PO = 0.1 Wrms V ripple=200mV sine p-p, input ac-grounded f=217Hz f=20 to 20kHz VDD = 3.6V, VIC=1VPP, f = 217Hz THD+N % Power Supply Rejection Ratio PSRR -70 -65 60 dB Common Mode Rejection Ratio CMRR dB http://www.SeCoSGmbH.com/ Any changes of specification will not be informed individually. 01-June-2002 Rev. A Page 3 of 5 SPEMA2004A Elektronische Bauelemente 1.7W Mono Fully Differential Audio Power Amplifier ELECTRICAL CHARACTERISTICS VDD = 2.5V The following specifications apply for VDD=2.5V, AV = 1 and RL =8 unless otherwise specified. Limits apply for TA = 25C Characteristics Quiescent Power Supply Current Shutdown Current Symbol IDD ISD Typ. 4 0.1 0.62 0.4 0.5 0.3 - Limit 8 1 - Units mA A Test Conditions VIN = 0V, Io = 0A VSDNB=GND THD+N = 10 %(max), f = 1kHz RL = 4 RL = 8 THD+N = 1%(max), f = 1kHz RL = 4 RL = 8 V ripple=200mV sine p-p, input ac-grounded f=217Hz f=20 to 20kHz Output Power PO W dB Power Supply Rejection Ratio PSRR -70 -65 CHARACTERISTIC CURVE THD + Noise vs Output Power THD + Noise vs Output Power http://www.SeCoSGmbH.com/ Any changes of specification will not be informed individually. 01-June-2002 Rev. A Page 4 of 5 SPEMA2004A Elektronische Bauelemente 1.7W Mono Fully Differential Audio Power Amplifier CHARACTERISTIC CURVE (cont'd) THD + Noise vs Frequency PSRR 3.6V power supply with square wave, 500mVp-p, f=217Hz, duty=20% http://www.SeCoSGmbH.com/ Any changes of specification will not be informed individually. 01-June-2002 Rev. A Page 5 of 5 |
Price & Availability of SPEMA2004A |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |